Swing gates provide an elegant and versatile solution for enclosing many residential, commercial, and industrial properties. In fact, due to their ease of installation and the total absence of ground guide rails, they are the ideal choice where there is uneven terrain or surfaces with little side clearance.
To ensure flawless and long-lasting operation, it is also essential for this type of structure to select high-quality components that can ensure maximum performance and durability.
FAC Srl, a leading manufacturer of gate components, offers a full range of swing gate accessories designed to ensure maximum safety and efficiency in every context.
Certified, quality Made in Italy solutions, chosen by designers and installers around the world for their extreme robustness and reliability.
Let us see, in detail, the features of this particular type of structure, and FAC’s offering of components and accessories.
Features and advantages of swing gates
Characterized by swing gates with leaves that swing on hinges attached to columns or pillars, swing gates are a particularly popular solution for several reasons.
First of all, ease of installation: swing gates do not require ground rails, and are therefore easier to install than other types of gates.
Second, they adapt to any type of terrain and space, making them an ideal choice for uneven surfaces or areas where lateral space for sliding gate movement is limited.
With internal openings of up to 180°, swing gates are also appreciated for their great versatility, since they can be installed in residential settings as well as in commercial or industrial spaces, adapting to small or large doorways.
The importance of the right swing gate accessories
To ensure stability, safety and efficiency, swing gates must also be equipped with robust and quality accessories and components. In fact, every element of the gate, from the hinges to the swing gates, must be carefully chosen to ensure maximum durability and performance of the structure.
FAC offers a complete range of swing gate accessories designed to meet the specific needs of each type of project. From top and bottom hinges to safety hinges, pins and cables, each product is designed to ensure functionality, strength and long life.
Available in galvanized or stainless steel finishes and a wide range of sizes, our accessories are a perfect fit for swing gates of all sizes, from small pedestrian gates to large gates and heavy industrial gates.
Our components are tested to ensure maximum performance and fully meet the safety requirements of industry standards. The production, entirely Made in Italy, reflects our commitment to providing reliable and superior quality solutions, supporting installers and professionals worldwide in the creation of safe, durable and functional gates.
Let us now look in detail at some of our component solutions for swing gates, designed to offer maximum versatility and security in all kinds of applications.
Upper and lower hinges for swing gates
Hinges are an essential component to ensure swing gate movement.
FAC offers a wide range of upper and lower hinges for swing gates designed to fit any type of installation:
- Hinges with anti-rotation hinge pin
- Hinges with U-bolt
- Banded hinges
- Orthogonally adjustable hinges
- Hinges with bearing
- Lower hinges with bearing
Below is a brief discussion of each type.
Hinges with anti-rotation hinge pin
Designed to prevent the hinge pin from coming loose, anti-rotation hinges are available in our catalog in galvanized steel or stainless steel, with several installation options: cementing, welding or fastening.
Especially suitable for large gates or those subject to heavy use.
Hinges with U-bolt
Hinges with U-bolts are a versatile solution suitable for a wide range of gates. The presence of the trestle ensures an extremely firm fastening, making them ideal for installations that require high strength.
Available in classic or adjustable versions, they can be chosen in the weld or cement type, depending on specific installation needs.
Banded hinges
Band hinges are designed to provide strong and durable support, and are particularly suitable for large gates and doors. Available in galvanized steel and in various sizes, these hinges can be welded, cemented, or fastened using special plates.
Variants include classic, adjustable and plate versions for greater installation flexibility.
Orthogonally adjustable hinges
One of the most advanced solutions offered by FAC are the orthogonally adjustable hinges, which allow the door opening angle to be expanded by up to 180 degrees. Available as weld-on or fix-on hinges, these hinges are an ideal choice for optimizing opening spaces, especially in settings with large entrances or where greater freedom of door movement is required.
Hinges with bearing
Bearing hinges are one of the most popular swing gate accessories.
With high-quality bearings, these hinges minimize rotational friction, increasing the life of gate components and improving the efficiency of the entire system.
For this type of hinge FAC offers adjustable weld-on, 4-hole bracket or square section versions, ensuring solutions to suit all configurations.
Lower hinges with bearing
For the lower support of swing (i.e., sash) structures, FAC offers a full range of lower hinges with bearings, always designed to support high loads and ensure stable movement of the structure.
Options include tapered roller, grease nipple, or 4-hole plate models for ground fixing.
Matching upper and lower hinges
To simplify the work of installers, FAC has developed ready-to-use upper and lower hinge combinations selected according to the weight and size of the gate.
These predefined configurations, which include options for openings up to 180° or for gates on a slope, offer the convenience of a complete solution that is ready to use and easy to install.
Floor and wall-mounted knockers
FAC also offers a full range of ground and wall-mounted swing gates designed to ensure proper positioning and safety of the gate during movement.
These accessories act as a stop during both opening and closing, preventing gates from leaving the work area in the case of manual opening, and providing additional protection for motorized gates in the case of motor malfunctions.
Models available include classic floor or flange-mounted and wall-mounted casements with adjustable dowels or plates.
In addition to the classic solutions, FAC also offers several types of electrofusion gate doors, which are available for both welding and fastening.
Anti-fall cables
FAC rounds out its swing gate accessory offerings with a wide range of anti-fall cables, which are essential for ensuring maximum safety of structures.
Designed to support the gate leaf in case of failure caused by excessive wear and tear, hinge breakage, or other accidents, the anti-fall cables prevent the gates from falling suddenly, which could cause damage to surrounding people or property.
Recommended for every installation, the anti-fall cables offered by FAC are a crucial element in obtaining CE marking, ensuring that the gate meets the safety standards required by regulations.
Bi-Folding kit: the innovative solution for swing gates
In addition to classic swing gate accessories, FAC has designed kit solutions specifically for this type of gate in order to facilitate installers’ choice with a specific and ad hoc component offering.
Designed to reduce the gate’s footprint by allowing various types of opening, even in the absence of side sliding space and in the presence of uneven terrain, our Bi-Folding Kits, available in HD, Home and 180° versions, allow the creation of folding openings that allow the gates to fold inward at 90°, reducing the footprint space, or at 180°, allowing full use of the space dedicated to opening.
An innovative solution that significantly reduces the opening space, and is therefore ideal for making compact folding gates that require large openings but lack sufficient side sliding space.
Thanks to the complete absence of guide rails on the ground, the Bi-Folding Kit is also an ideal solution where there is uneven or sloping terrain.
Let us briefly look at the specific features of the different models available for this type of kit intended for swing gates.
Bi-folding Home Kit
Designed for gates in residential, commercial and industrial buildings, the Bi-Folding Home kit for 90-degree openings allows for compact structures suitable for supporting gates up to 5 meters wide, which in the case of double application allow for up to a 10-meter opening, without a guide rail on the ground.
With a range of compact, motorized and easy-to-install accessories, this kit is ideal for optimizing openings even in small spaces.
HD Bi-Folding Kit (Heavy Duty)
For those looking for a solution for larger gates that are particularly demanding in terms of protection and safety, FAC offers the Bi-Folding HD accessory kit, designed to minimize the size of folding leaves while offering greater strength and ease of opening, thanks to its reinforced arm.
An ideal solution for securing spaces in commercial and industrial facilities.
Quick and easy to install, the Bi-Folding HD Kit allows openings of 8 meters, increasing to 16 meters with a double installation.
180° Bi-Folding Kit
To expand lateral passage spaces FAC has developed the Bi-Folding 180° Kit, which allows for a greater angle of movement by rotating the sashes and then moving them 180° relative to the opening passage in order to facilitate entry.
With special accessories, this kit allows openings up to 4 m, extendable to 8 m in case of double installation.
All kit Bi-folding includes:
- Joint for column and slider arm: to be anchored on sash and column, it enables secure door engagement by allowing smooth and precise movement of the structure.
- Gate joint: this specific accessory allows connection and folding between the two gates when opening the gate.
- Special hinges for 90° and 180° opening: the hinges, included in all Bi-folding Kits, are suitable to ensure proper movement for the indicated capacities. Both upper and lower hinges are included in kit.
- Aluminum hinges specifically for folding leaves: in addition to the sash joint that allows movement, the Bi-folding system is equipped with special aluminum hinges with 2 wings and rebate to be attached directly to the leaves. Each kit has the right amount of hinges based on opening size and weights to ensure proper support between doors.
- Special protective covers: protective covers are exclusively designed to protect people from accidental events. They should be installed at the fold point between the sashes, obscuring the mechanism to prevent accidental insertion of hands.
The advantages of FAC’s Bi-Folding Kit
Choosing FAC’s Bi-Folding Kit means making it easier for you to choose the right accessories for your folding gate, being assured of quality components that are sturdy, aesthetic and easy to install! An innovative and patented solution designed for all residential and industrial installations.
Why choose FAC for your swing gates (and more)?
With more than 50 years of experience in gate components and a solid presence in the national and international market, FAC Srl is a partner of choice for all designers and installers looking for reliable, quality solutions and accessories for residential and industrial gates and doors.
Here are some reasons why you should choose FAC!
- Made in Italy quality: every product in our catalog is designed and made in Italy, with high quality certified materials.
- Established experience: with more than 50 years in business, FAC is an established benchmark in the gate component industry.
- Continuous innovation: the company constantly invests in research and development to come up with innovative and cutting-edge solutions.
- Personalized assistance: the FAC team of experts is always available to guide customers in selecting the most suitable components for their projects.
So, visit our site now to discover the full range of swing gate accessories and more! Want to browse our catalogs? Click here.
